NITECORE. BB2 ELECTRONIC PHOTOGRAPHY BLOWER

01. Electronic Blower developed for cleaning photographic and cinematographic equipment.
The Pioneer in Electronic Blowers

02. Global media coverage
Nitecore BlowerBaby™ our first electronic blower for photography equipment, has been recognized by prestigious design awards, earning
media trust in the photography communities.

03. New level in camera cleaning.
Nitecore is dedicated to providing more innovative and practical products to end users, leading the development in the production of cleaning products for
photographic equipment.

Maximum Air Speed ​​80km/h, Detachable Magnetic Brush, Air Pressure for Dust Cleaning 2.7kpa, Lighting Function, Rotary Options Switch.

04. 33.6W High Performance Motor
Compared to the older version, the motor power has been increased by 51%, so that it is very easy to clean the dust from the lenses.

05. It has a built-in rechargeable Li-ion 7.2Wh battery.
Improved capacity by 30% compared to the previous model. With a full charge, the device can be used for approximately 210 cleanings.

06. Improved air duct and impeller.
Designed by applying fluid dynamics, the air duct can effectively reduce air resistance while improving its power.
Built-in 42mm fan with 20 high strength blades provides compact and lightweight construction to reduce noise and increase
air blowing efficiency

07. Air pressure for dust ejection reaches 2.7kPa.
80% improved pressure compared to other models.
– Common manual blower ………… 1.5 kPa
– Nitecore BlowerBaby™ …………………… 1 kPa

08. Extremely efficient cleaning performance.
Powerful air blast with a speed of 80Km/h, able to clean even large surfaces with improved cleaning performance.
Improved cleaning performance by 230% compared to common blowers.
– Air speed of BB2 …….80 km/h
– Air speed of BlowerBaby™ …… 70 km/h
– Hand held common blower ………. 35 km/h

09. Improved cleaning performance even on large surfaces compared to common blowers.

010. It has three selectable cleaning functions.
– TURBO : Extremely efficient cleaning performance.
– OPTICAL: For cleaning the sensors of cameras.
– SILENT: Operation with the minimum noise of 55dB

011. Cleaning process Brushing – Blowing
Provides improved cleaning performance
– With design that hides and shows the brush

012. Magnetic, quickly detachable brush.
It allows quick switching between brushes depending on the surface to be cleaned.
– The package includes a brush for cleaning the body (black brush).
– As an option (not included in the package) there are brushes for cleaning the lenses (white brush).

013. Comprehensive cleaning of cameras
– With the TURBO function, the body is cleaned
– With the OPTICAL function of the sensor
– With the SILENT function, general cleaning is done with the lowest noise.

014. User-friendly LED light
The device is equipped with a high CRi LED light (CRi>90) that can be activated in the dark and clean areas that are difficult to see, so
that a thorough cleaning is always achieved.

015. It has two options for cleaning the devices.
– QUICK cleaning: Press and hold the power button to start cleaning. Release the power button to exit.
– CONTINUOUS cleaning: Press the activation button twice to start cleaning. Briefly press the power button to shut down.

016. Lock function . Protection against accidental activation during transport.
Enable the lock function to prevent accidental activation of the device during transport or storage.

017. High density filter.
Air intake from multiple directions is designed to prevent secondary damage to the lens surface, making the device capable of operating in
a variety of environments.

018. Battery status light.
Under the main power switch there is an indicator light that, depending on its color, indicates the battery's energy.
– Green color : Battery power is above 50%
– Blue color: Battery power is below 50%
– Red color: Battery power is below 10%

019. Recharging from USB-C port
Extremely efficient solution since USB-C ports do not require time to install the cable.

020. Very small size and portable
The size of the device is as small as possible, which makes it easy to carry and store.
It can be carried in the bag as well as in the pocket.
Dimensions: 141 mm x 62 mm x 32 mm

021. More details
– The rotary mode selector is made of aircraft-grade aluminum alloy by CNC method
– The sliding switch that shows and hides the brush is made of stainless steel with anti-slip texture.
– The activation switch is made of stainless steel.
– The shell of the device is made of aeronautical grade aluminum alloy
– The tip of the blower is coated with high quality silicone material.
– The shutter lock switch is made of stainless steel.
– The wrist strap hole is made of aircraft grade aluminum alloy.
– The filter is of high density.
– Dust-proof and sealed construction.
– Transparent protective cover for dust, on the nose of the device.

022. Cleaning solutions for your photographic equipment from NITECORE

023. Technical characteristics
– Input : 5V – 2A
– Nominal voltage: 33.6W
– Battery capacity: 7.2Wh
– Cleaning for: About for 800 times (Maximum) (10 seconds each cleaning)
– Rotation speed: 30,000 RPM ( revolutions per minute)
– Wind speed: 80 Km/h
– Dimensions: 141mm x 62mm x 32mm
– Weight: 210g