AIMPOINT® COMPM4

OVERVIEW
The Aimpoint® CompM4 sight, with high battery compartment, belongs to the CompM4 series sights which are the finest sights Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery!

The first Aimpoint Comp sight came out in 1995 and today there are more than 1 million sights from the Comp series in use worldwide. All Comp sights are soldier-tested and combat-proven, in other words they are extremely robust high quality products.

The Aimpoint® CompM4 series of sights are the toughest sights that Aimpoint has ever produced and they are the standard infantry soldier sight in many NATO countries. These optics are extremely rugged and operate continuously for up to 8 years using a single AA battery. The competition is not even close. The Aimpoint CompM4s is the latest version of the U.S. Army's M68CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997.

The CompM4 has a top-mounted battery compartment while the CompM4s has a low battery compartment – this is the only difference between the sights.


COMPLETE AND READY TO MOUNT
The standard configuration of the CompM4 series of sights contains the sight (CompM4 or CompM4s), a QRP2 mount and a standard AR15 spacer. These sights also come equipped with a killFlash® anti-reflection device and bikini rubber lens covers.


CUSTOMIZE YOUR SIGHT
CompM4 and CompM4s sights can be customized according to your preferences and needs. Both the standard mount and spacer can be changed to meet the demands of your specific mission and equipment.

Launched 2007.


UNIQUE FEATURES
High battery compartment
Compatible with every generation of NVD
ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
Internal voltage regulator allows the CompM4 to be used with any AA size battery
7 NVD settings and 9 daylight settings
QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation and lower the risk of snagging on other gear
Mount base is keyed into to the body of the sight to absorb recoil
Mount base screws directly into the sight – no separate sight ring required.
500,000 hours of use on NVD setting
2 MOA dot for close combat and long distance engagement
Matches perfectly with Aimpoint® 3XMag
Unequalled light transmission
Front lens opening is threaded for addition of killFlash® anti-reflective device
Submersible to 150 feet (45 meters)
Vertical spacer included
Type classified as the U.S. Army’s new M68CCO
Improved adjustment caps are easier to remove and protected against impact
Can be used with a carry handle adapter for use on all M16 rifles
Mechanical switch for speed and reliability


TECHNICAL SPECIFICATIONS

GENERAL SPECIFICATIONS
Art.No: 11972

OPTICAL SPECIFICATIONS
Operating principle: Reflex Collimator sight with LED
Optical magnification: 1x
Aiming dot size: 2 MOA
Dot intensity: Visible against a background luminance of 0,1 to 55 000 lx
Optical signature: No optical signature is visible at 10 meter distance, front side, on appropriate settings with NVD 3
Dot color: Peak Wavelength: 650 ± 10 nm
NVD compatible: Yes
Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3
Clear aperture: 26 mm
Eye relief: Unlimited

POWER SOURCE
Battery type: AA size battery, (rechargeable 1.2V), alkaline/lithium 1,5V or lithium 3-3,7V (acceptable voltage 1,2-5volt)
Battery life - Day time use: 80.000 h continuous (pos. 12 of 16). Responds to >500 000 hours at NVD setting (pos. 4)
Power intensity: 7 NVD and 9 Daylight, of which 1 extra bright

PHYSICAL SPECIFICATIONS
Length sight only: 120 mm (4 3/4")
Length conf: 135 mm (5 5/16")
Width: 72 mm (2 13/16")
Height sight only: 60 mm (2 3/8")
Height conf: 72 mm (2 13/16")
Weight sight only (incl battery): 268 g (9,4 oz)
Weight conf: 376 g (13,2 oz) incl. Lens Covers, Kill-Flash, Mount, and Spacer
Housing material: High Strength Aluminum
Housing finish and color: Matte black
Housing anodized: Yes
Material mount and spacer std conf: High Strength Aluminum
Surface treatment: Hard anodized, matte
Height of optical axis - sight and mount: 30 mm (1 3/16") over top surface of Picatinny/Weaver Rail
Height of optical axis - sight, mount and low spacer: 39 mm (1 9/16") over top surface of Picatinny/Weaver Rail
Adjustment: Range ±2 m at 100 meters (±2 yds at 100 yds) in windage and elevation, 1 click = 16 mm at 100 meters = 13 mm at 80 meters = 9/16" at 80 yds